How to Keep Your Windows Looking Like New

When was the last time you really took a look at your windows? Not through them, at them?

While they were developed to bring natural light into your home and supply a way of ventilation, without proper care, your home’s windows will likely wear too soon and need to be replaced.

If you’re like numerous homeowners, you might not invest sufficient time doing what’s essential to keep your windows operating and looking like brand-new. Standard upkeep techniques apply to all window designs, but by understanding how each design and material works, you’ll have the ability to keep them in exceptional condition for many years to come.

A Thorough Cleaning

Windows are the first line of defence against nature and the elements. They are exposed to adverse weather consisting of penalising winds, sizzling heat from the sun, freezing cold temperature levels, and harmful wetness from all kinds of weather.

Combine all these conditions with the build-up of dirt and particles, and you’ll soon see extreme wear on all of your windows.

Regular cleaning can help keep your windows looking excellent and minimise issues. Here’s what must be consisted of in your regular regimen:

  • Wipe away dirt build-up with a moist cloth and mild cleaner.
  • Open the windows and eliminate leaves, sticks, pine needles, spider webs and pests and other particles with a soft brush.
  • Keep window panes tidy with a spray glass cleaner or a solution of white vinegar and water. Attempt using paper instead of paper towels for a streak-free shine. You can likewise use lint and scratch totally free Microfibre Glass Cloth. It works completely with all windows and glass surfaces.
  • Ensure to clean up the window housing and adjacent wall to keep the accumulation of dirt to a minimum.
  • Take care not to use too much water as this can add to harm such as decaying and swelling, mould and mildew development, and window jams.

Careful Inspection

Each season you ought to evaluate the structural integrity of all windows. Indications of wetness seepage will appear in locations of discolouration and spongy consistency. Use a metal rod to probe locations of concern.

Check the condition of any weather condition stripping. It ought to be versatile adequate (not hard) to compress and get rid of air infiltration. Replace any worn or damaged pieces.

Look for fogging or condensation accumulation between double- or triple-pane windows. A damaged glazing seal will cause this problem and will minimize the insulating properties of your windows.

Inspect for breakable or warped frames. These may be more prevalent in locations that are exposed to sunshine for extended durations throughout the day. You might see that the paint has actually peeled on those windows also.

Gaps in between the window case and wall are common when your house settles or from consistent weather direct exposure.

Re-Seal Windows

  • Check for any openings or damaged seals where warm air can escape and cold air can penetrate and reduce your house’s total energy efficiency.
    Use latex caulk to fill spaces between the window casing and wall inside.
  • Change rubber gasket seals that keep water and air from dripping inside.
  • Fill areas around the inside boundary of your windows with insulation to minimise drafts and energy expenses.
  • Caulk any outside window spaces.

Re-Painting

It’s crucial to keep your wood and metal window frames secured so they’ll continue to look like new. Re-paint every 3 to 4 years, however make sure to thoroughly clean them and eliminate any loose or peeling paint. To keep your windows operating smoothly, make sure to paint with the window open and enable to dry before closing.

Remove splattered paint from the glass with one cup of boiling white vinegar and a soaked fabric. Rub the cloth on affected locations to loosen up paint. Stubborn paint spots can be eliminated with a single-edged razor blade and soapy water. Be sure to place the blade at a 45-degree angle to avoid scratching or harming the glass.

Repair or Replace Damaged Parts

Wood windows are particularly susceptible to damage and degeneration, so you’ll want to repair any decayed areas, splinters, holes and fractures as soon as possible. Small decay can be repaired by using a screwdriver and epoxy putty. Scrape out the decomposed areas, fill with putty, smooth out with sandpaper and finish with guide and paint for a like-new window frame.

Split or broken glass in any window design must be changed quickly for optimum security and security. Even minor fractures can jeopardise the strength of the window and permit air to leak into your house. Cracks in double- and triple-pane windows filled with argon gas will enable the gas to get away and lead to lost energy and higher utility expenses.

Broken hardware such as locks, manages, tracks and hinges ought to all be changed to keep your relative safe and safe and secure.

Wood-boring insects can not only be an annoyance but can seriously damage your wood windows.

Termites are common and can destroy anything in their course. Telltale indications are mud tubes, cracked or bubbling paint, and the winged pests inside or outside your home. Usage termite bait or a chemical treatment to prevent future invasion.

Little holes in your window frames may suggest an issue with wood-boring beetles. The larvae can live inside your home from 2 to five years. These pests will actually consume the wood and completely destroy your windows, so paint on an insecticide specially made to kill the beetles.

Carpenter ants are another wood-boring insect that can do major damage to your wood window frames. They bore holes in order to make their nests within. Before treating your windows with spray pesticide, damage nests outside and use ant traps or spray inside to eliminate any ants there.

Window Replacement

Windows are an exceptional method to ventilate your home while keeping bugs and animals out. Naturally, they’re also exposed to all types of weather conditions that trigger dirt build-up and degeneration.

Regular cleansing and repair work of holes, rips and tears will keep them running appropriately. You may need to change the spline that holds the screen in place as it can disintegrate gradually.

Eliminate Mould and Mildew

Excess wetness and condensation build-up can result in mould and mildew development on your window sills. It not only impacts the appearance of your windows, it can also be a health hazard for you and your family.

Unique care should be required to get rid of mould so spores will not be spread throughout your house. Clean the afflicted location with meal detergent, baking soda and water; then, decontaminate with a bleach and water mix.

Clean Out Weep Holes

Weep are consisted of in your window sills to enable excess moisture to escape, and breather holes allow fresh air in. Both types of holes help keep the window from building up condensation.

These holes generally plug up from dirt or get painted over. Clear any obstructed holes with a wire or toothpick to keep them running appropriately.


Post Sponsored by Glaziers Harrow – Your Glazier Local to You.

Leave a Reply

Your email address will not be published. Required fields are marked *